OXSA SNOW 285
One of the strongest Snow Blowers in the market
OXSA SNOW family's 285 is designed for heavy professional and contracting purposes. SNOW 285 is best at wide roads where you need to get things done quickly!
Designed and produced in Finland for nordic winter
Like all OXSA SNOW - family snow blowers, SNOW 285 is also made to withstand stress in demanding environment. To ensure this, all its parts are slightly "over" measured. At the frame where the stress is at the highest we use S355 structural steel and places where items expose to a lot of wear - like blades - we use HB500 special steel. This ensures long life, structurally stronger quality products which serve its owner as long as possible.
The challenge of slush and wet snow is also taken into account at design. Which we can say by the response from field that OXSA SNOW 285 also works nicely in mild weather.
OXSA SNOW 285 is available with 2 hatch model.
Product properties
Accessories
- Hydraulic bank cutter for left side
- Hydraulic bank cutter for right side
- Bank cutter's rubber blade. Expand working width for 60 cm
- Front and back legs grader that will roughen the leg track
- Smooth blade
- Tooth blade
- Speed reducer gearbox for 1000 rpm power take-off (PTO)
- Front wheels
Watch video of wall cutter (in Finnish)
Technical information
| SNOW 285 | |
|---|---|
| Working width, cm | 282 |
| Working width w. cutters, cm | 282 + 60 + 60 = 402 |
| Clearing width, cm | 270 |
| Weight, kg | 1070 kg |
| Rotor diameter, mm | 1000 |
| Infeed wings | 8 (HB500) |
| Throw wings | 4 (HB500) |
| Speed reducer gearbox | 540rpm / 1 ¾” |
| Bearing | |
| At front | 70 mm |
| At back | 75 mm |
| Throwing opening, mm | 360 x 360 |
Snow blowers pivot shaft must be 1¾ Z=6 and equipped with 1400 Nm overload switch (breaker bolt or disk switch). Recommeded power requirements are 95 hp / 540 rpm or 150 hp / 1000 rpm. Matching pivot shaft can be ordered with the product.
Share this page